Jeremiah D. Upp, Engineer
FAIRFIELD COUNTY, OHIO
Welcome to Fairfield County Engineer's Office, Lancaster, Ohio.
Engineer: Survey Information
Fairfield County
Fairfield County Engineering
Office Survey Information
Requirements For New Metes And Bounds Descriptions And
Plats Of Survey.
All new surveys, metes and bounds descriptions, and plats of survey not previously recorded, must be prepared by a registered Professional Surveyor and must be in compliance with the Ohio Administrative Code, Chapter 4733-37.
The following checked items will be required to be revised by the Professional Surveyor: View Check List
APPROVED ROAD INTERSECTION MONUMENTS
Last revised 7/12/05
*subject to change without notice
INTERSECTION: CR30 Delmont Rd/CR57 Crumley Rd
TOWNSHIP: Hocking
MONUMENT: 5/8" Rebar
PLAN REFERENCE: CR30-HOC38 Bridge Plan 2005
TWP: 14
RANGE: 19
SECTION: 8,9,16,17
MONUMENT ON: Common Corner
REFERENCE TO: N/A
INTERSECTION: CR31 Coonpath Rd/Maradon Ct.
TOWNSHIP: Pleasant
MONUMENT: 3/4" Steel Rod
PLAN REFERENCE: CR31 Road R/W Plans 2000
TWP: 15
RANGE: 18
SECTION: 17,20
MONUMENT ON: N/A
REFERENCE TO: NW CR, NE QTR, SEC 20
INTERSECTION: CR31 Coonpath Rd/S.R. 188
Lancaster-Thornville Rd
TOWNSHIP: Pleasant
MONUMENT: 3/4" Steel Rod
PLAN REFERENCE: CR31 Road R/W Plans 2000
TWP: 15
RANGE: 18
SECTION: 16,21
MONUMENT ON: N/A
REFERENCE TO: Common Corner 15,16,21,22
INTERSECTION: CR31 Coonpath Rd/TWP1339 Susalou Ct
TOWNSHIP: Pleasant
MONUMENT: 3/4" Steel Rod
PLAN REFERENCE: CR31 Road R/W Plans 2000
TWP: 15
RANGE: 18
SECTION: 17,20
MONUMENT ON: N/A
REFERENCE TO: NW CR, NE QTR, SEC 20
INTERSECTION: CR31 Coonpath Rd/TWP427
Old Millersport Rd
TOWNSHIP: Pleasant
MONUMENT: 3/4" Steel Rod
PLAN REFERENCE: CR31 Road R/W Plans 2000
TWP: 15
RANGE: 18
SECTION: 16,17,20,21
MONUMENT ON: Common Corner
REFERENCE TO: N/A
Only monuments on the above list are approved road intersection monuments which can be referenced, as a point of beginning, on a new survey. A monument at a road intersection may be added to this list if it is referenced to a section corner or section 1/4 corner, is shown on a centerline plat on file at the Fairfield County Engineer's Office, and is approved by the County Engineer.